Daewoo Propane Forklifts Salt Lake City

Change a Propane Tank

Propane powered forklifts are commonly utilized in warehouses. The lift truck is designed with the propane tank mounted at the back of the operator. The tanks, that look much like beer kegs, need to be replaced from time to time as they have a limited lifespan. Forklift drivers must always use caution when handling propane tanks. Compressed gases are really hazardous, especially since the gas is flammable. Always use care when replacing and removing propane tank to prevent being injured.



1 To change a propane tank, first stop the forklift while leaving the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This procedure burns off the gas in the transfer hose that connects the tank and the engine. Prior to taking the second steps, put on the correct safety equipment, like insulated gloves made of either leather or neoprene. It is really essential for you to protect your skin from contact with the compressed gas, that is extremely cold.

2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reattach the holding straps and reattach the hose at the valve of the tank by tightening the nut.

3 Leaks can be checked simply by applying soapy water to the valve and slightly opening it. If there is a leak, it would cause bubbles to foam from around the valve. If this occurs, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and afterward perform the leak inspection procedure again. Persistent leaks mean that the connecting hose and nut must be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank should be replaced.

4 Finally, open the valve all the way to allow the gas to fill the connecting hose. Then you could start the forklift and continue working.

• Mitsubishi Large Capacity Forklift Salt Lake City
  Sometimes, it pays to examine the process of selecting a forklift. Like for example, does your company always choose the same units for your dock work? If so, you can potentially miss out on a... More
• Kalmar Large Capacity Forklift Salt Lake City
  In order to be profitable in the business of handling empty containers, the goal of the game is to transport as many units as possible in the shortest amount of time. These jobs should be... More
• Toyota Narrow Aisle Forklift Salt Lake City
  Very Narrow Aisle Employment is on the rise and the economy is easing, the stock market is showing some signs of strength, which has helped to enhance the overall feelings of the consumer. Most indicators... More
• Hyster Cushion Tire Forklift Salt Lake City
  The varied range of industrial tasks and application would rely on many different kinds of machinery. Because of this, Hyster has designed pre-configured engine transmission bundles, enabling the customer to only pay for the options... More
• Kalmar Gas Forklifts Salt Lake City
  In the marketplace, lift trucks will have a lot of names, however the names do not alter the way the machinery is set up to function. The side loader or forklift is just one of... More